Run "Disk Management" and see if the drive is listed, and what its status is. This setting isn’t usually an issue in an existing hard disk installation that suddenly doesn’t work anymore, but it can cause problems when you move a drive from one PC to That way, you can easily boot from a CD or DVD without altering the BIOS settings, but it might add a few seconds to the boot time while the optical drive After using FDISK to create or delete partitions, you must reboot the machine before doing anything else.Checking drive formattingIf FDISK recognizes the drive and it has a valid partition type, you http://fhsla.net/hard-drive/no-hard-drive-detected-dell.html
Make sure the plug is fully inserted. Look at that setting, and set your old hard drive to match it. If it is must and can't get repaired then its OK, even for repair data to lost? Related Resources solved Hard Disks - 2nd SATA drive detected in BIOS but NOT in Windows Disk 2nd Sata Hard Drive not Detected in BIOS solved SATA Hard Drive Not Detected
If there’s no movement at all, either the drive’s physical mechanism is shot or the Molex connector you have selected is faulty. Hi Penchal,If you have connected it to another MB, and it is not detected in the BIOS, then there a problem with the Drive mechanism. Installed a second drive as a slave Bios saw it but my computer did not I tried what you said and with a few mods it worked All I can say I am going to power off for a minute and double check my cables and all, but my BIOS did not show the Barracuda after post when I just reconnected the
All Rights Reserved. On Intel boards, for example, SATA II ports tend to be black; SATA III ports are blue. I have two hard drives: master( where the OS is installed) and slave. Secondary Hard Drive Not Detected In Bios Sometimes, though, it’s not easy to locate Pin 1.
Obviously, I am trying to recover the files that are on the old hard drive (which I wanted to run a virus check on before moving any files over to the Second Hard Drive Not Showing Up In Disk Management The first one should be your IDE system drive.If it does not see your slave HDD, check to make sure the HDD has power, and you can hear it spinning up This chapter is from the book This chapter is from the book PC Help Desk in a Book: The Do-it-Yourself Guide to PC Troubleshooting and Repair Learn More Buy This http://www.tomshardware.com/forum/270832-32-sata-hard-drive-detected-bios-setup When I tried reboot again its appeared.
You can partition a hard disk as a single drive letter or as two or more drive letters. External Hard Drive Not Detected A CCM membership gives you access to additional options. The system may be a bit convoluted but I can use it for that. However, if you are working with an older or quirky BIOS, you might need to enter the BIOS setup program and change the drive’s IDE channel—i.e., Primary Master, Primary Slave, etc.—from
These settings are not an issue when troubleshooting a drive that has suddenly gone bad in an existing system, but if you are moving a drive from one system to another Since there's no master / slave setup, there is no 'master' hard drive. Secondary Hard Drive Not Detected Windows 10 Your motherboard might have some SATA II ports (running at 3Gb/s) and some SATA III ports. Second Hard Disk Not Detected Windows 7 You may also...
penchalJul 16, 2011, 3:52 PM Dear Sir,I tried by connecting to others computer MB even though it is not detecting. http://fhsla.net/hard-drive/if-you-have-an-external-hard-drive-is-a-flash-drive-needed.html You can only have one active OS partition at a time. There should be a chart or sticker on the drive showing the positions. Similar Topics My external hard drive is not detected by Windows anymore Jun 28, 2011 My computer will not recognize my hard drive Feb 13, 2011 Help me please, my computer Internal Hard Disk Not Detected In Bios
Read on as Faithe Wempen reveals her seven methods for tracking down hard drive problems. Search Sign Up Log In Home Forum How To Download News Encyclopedia High-Tech Health Sign Up Language English Español Deutsch Français Italiano Português Nederlands Polski हिंदी Bahasa Indonesia Log In Subscribe Some older Sata drives have a power connection like a Pata drive ( 4 pins). check over here Well, the master hard drive and the CD ROM drive are connected to the primary IDE cable.
Report Patrick- Jul 4, 2010 at 09:36 PM Thanks so much. How To Repair Hard Disk Not Detected Sometimes those little screws can be hard to reach, so you only want to mount the drive once. As you can see it works fine.
For testing purposes, the hard disk can temporarily sit at an angle, unmounted, but propped up in some way. Does anyone have the solution? make-use-of-logo logo-background menu search search-start close email bookmark facebook google twitter pinterest stumbleupon whatsapp amazon youtube youtube label-rectangle triangle-long down mobile-icon PC & Mobile Windows Mac Linux Android iPhone and iPad Hard Drive Not Showing Up In Bios With modern SATA, which is a serial bus instead of the older parallel EIDE bus, things are simpler.
Some motherboard manufactures disable unused ports in the BIOS by default. HE GOT A NEW DRIVE AND CANT ACCES THE OLD ONE THAT HAS HIS STUFF ON IT.... As for the jumpers it should not have changed but try master or single or no jumper at all. this content Such errors are typically caused by improperly shutting down the PC or abnormal program termination.A message about a data error while reading or writing the drive is probably a physical error.
Take the 2nd HDD and connect it to a different computer to see if it works OK. If so, what is that status?Checking physical connectivityTo work properly, a hard drive needs power and a connection via a ribbon cable to the PC. The host adapter takes one of those addresses, leaving seven or 15 for the remaining drives. I had been playing with the all day but your tip fixed the problem.
TJ Helpful +1 Report tjmartineau 38Posts Friday September 19, 2008Registration date December 23, 2008 Last seen Sep 27, 2008 at 07:20 PM Don't have the dvdrom connected at all, just have Each time I boot my pc, only the master drive appears as installed, and the slave doesn't. Also change the SATA cable from it to your MB.That could fix the problemIf the 2nd HDD is recognized in the BIOS, Boot up to windows and go to the Device IT COULD!!!!
If you do, use that IDE and power cable and jumper setting. For reference some links below. Tech Reviews Tech News Tech How To Best Tech Reviews Tech Buying Advice Laptop Reviews PC Reviews Printer Reviews Smartphone Reviews Tablet Reviews Wearables Reviews Storage Reviews Antivirus Reviews Latest Deals John_VanKirkJul 5, 2011, 8:03 PM Hello again,Do you mean that without your secondary HDD being connected to the MB, all works OK.
When your computer is not detecting a second hard drive, it usually means that you've done something wrong when installing or configuring the machine. Those services are VERY expensive, working with critical data and forensic data.Depends on how important and valuable the data is. bios will recognize my 2nd hard drive but I am not able to access it through my compluter. " I killdisked the second hard drive and neither DOS nor win95 could The most common ones are [Delete], [F1], or [F2].
I had a brainwave this morning. Jun 25, 2009 #2 hardwareman TS Rookie Topic Starter They are IDE. So shall I loose my entire data by getting replacement of HD?
© Copyright 2017 fhsla.net. All rights reserved.